Information Clause

In accordance with the art. 13 section 1 and 2 of the European Parliament and Council Regulation 2016/679 of the 27th April, 2016 on the protection of natural persons, with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation), hereafter RODO, I hereby inform that:

1. EVERMOTION S.C., 8 Przędzalniana Str., 15-688 Białystok, Poland is the Administrator of your Personal Data (APD)

2. Data Protection Inspector can be reached through e-mail:

3. Your personal data are to be processed on the basis of art. 6 section 1 letter a, b and f of RODO in order to:
a) prepare, conclude and execute the agreement and for other purposes approved by you,
b) to execute the legitimate interest like marketing of products and the agreement, claim assertion or defence against claims resulting from the law regulations.

4. Entities entitled to the reception of your personal data may be the authorised public bodies; mail providers; providers of the services covered by the agreement; responsible for debt recovery, keeping the archives, document utilization, legal consulting, technical services, IT services and accountancy.

5. Your personal data shall not be transferred to the third country, nor to the international bodies.

6. Your personal data shall be processed within the period of the agreement and upon your additional consent until you withdraw it. APD shall keep the data for the period of any civil law claim execution connected with the agreement.

7. You have the right to demand an access to your personal data, to correct or to delete the data if there is no other basis for the processing or any other purpose of such processing or to limit the processing of the data, to transfer the data to another administrator and to raise objections to the further data processing if there is no legal basis for further processing and to withdraw any previous consent.

8. You provide the personal data voluntarily, however they are necessary to conclude the agreement. The refusal of providing such data may result in the refusal of the agreement conclusion.

9. You have the right to lodge a complaint to the Personal Data Protection Office when in your opinion the data processing violates the regulations of General Data Protection Regulation of the 27 April, 2016 (RODO).

10. Your data will be automatically processed, including the form of profiling.
11. You are obligated to forward above mentioned information to your representative, especially if you appointed this person in the agreement as the contact person or as the representative for the agreement execution.


MarvelousDesigner 5 coming in September

Press release 2015-07-21 10:38 article  > Software

Read about new features.

MarvelousDesigner 5 will be released in September.

New features in MD5:

  • Cut Pattern - cutting patterns in 2D is now available. Discover your creativity with this pattern cutting feature
  • Offset as Internal Line - input specific measurements to offset patterns and segments as Internal Lines
  • Fold Arrangement - fold seam allowance, collars, and cuffs in the 3D Window before Simulation is activated
  • Direct Positioning - use the Direct Positioning tool to easily arrange patterns and OBJs on the Avatar and garment
  • Sewing Line Type -apply the Turned Sewing Line Type setting to achieve a folded, two-ply look
  • Side Geometry - apply and adjust the curvature of pattern edges, and/or express hems with facing
  • Align - align point, lines to the vertical (X) and horizontal (Y) axis
  • Round Corner performs the rounding of the edges and corners of 3D shapes along a 2D profile
  • UV Guidelines can be displayed and it lets you view and interactively edit the UV
  • Avatar Size Measurement - there are two methods to obtain the avatar’s length measurement. The Basic Length Measurement method takes a straight measurement, while the Surface Length Measurement method takes a measurement by following the curves of the avatar’s surface. A Height Measurement function, that takes the avatar’s height measurement from the avatar’s height and the ground, is also provided
  • Coordinate Gizmo - coordinate Gizmo in Select, Move, Rotate mode
  • Import Camera in FBX format

Marvelous Designer 5 is due to ship on September 15. Anyone buying version 4 of the software between now and the release date will get a free upgrade to version 5. Marvelous Designer 4 itself is available for Windows XP+ and Mac OS X 10.7+. A Linux version is available to enterprise customers. A permanent licence costs $550, or there are monthly and annual subscription options.

Author: Press release Editor: Michał Franczak
Tags: marvelous
You may also like...
Marvelous Designer 9's New features

Marvelous Designer 9's New features

Retopology and GPU simulation.


You need to be logged in to leave a comment. Don't have account? Register now.