Evermotion Pass 10% Off - Get Instant Access to Thousands of 3D Assets

Check Plans

Information Clause

In accordance with the art. 13 section 1 and 2 of the European Parliament and Council Regulation 2016/679 of the 27th April, 2016 on the protection of natural persons, with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation), hereafter RODO, I hereby inform that:

1. EVERMOTION S.C., 8 Przędzalniana Str., 15-688 Białystok, Poland is the Administrator of your Personal Data (APD)

2. Data Protection Inspector can be reached through e-mail: iod@evermotion.org

3. Your personal data are to be processed on the basis of art. 6 section 1 letter a, b and f of RODO in order to:
a) prepare, conclude and execute the agreement and for other purposes approved by you,
b) to execute the legitimate interest like marketing of products and the agreement, claim assertion or defence against claims resulting from the law regulations.

4. Entities entitled to the reception of your personal data may be the authorised public bodies; mail providers; providers of the services covered by the agreement; responsible for debt recovery, keeping the archives, document utilization, legal consulting, technical services, IT services and accountancy.

5. Your personal data shall not be transferred to the third country, nor to the international bodies.

6. Your personal data shall be processed within the period of the agreement and upon your additional consent until you withdraw it. APD shall keep the data for the period of any civil law claim execution connected with the agreement.

7. You have the right to demand an access to your personal data, to correct or to delete the data if there is no other basis for the processing or any other purpose of such processing or to limit the processing of the data, to transfer the data to another administrator and to raise objections to the further data processing if there is no legal basis for further processing and to withdraw any previous consent.

8. You provide the personal data voluntarily, however they are necessary to conclude the agreement. The refusal of providing such data may result in the refusal of the agreement conclusion.

9. You have the right to lodge a complaint to the Personal Data Protection Office when in your opinion the data processing violates the regulations of General Data Protection Regulation of the 27 April, 2016 (RODO).

10. Your data will be automatically processed, including the form of profiling.
11. You are obligated to forward above mentioned information to your representative, especially if you appointed this person in the agreement as the contact person or as the representative for the agreement execution.


Hell Yeah! - Making of

Vaclav Krivanek 2008-05-26 00:00 tutorial  > 3ds MAX  > misc

Hello, I want to share with you the small making of my Hell Yeah! portrait of the devil.

First I've started with simple base mesh in 3dsmax then I moved my model into ZBrush where fun starts.

Tip: Before you'll export anything to zbrush, don't forget to reset xform (especially when you're mirroring some objects) you'll avoid many problems.



When I put base mesh in zbrush at that time I actually didn‘t know how the final version will look, so I start playing with shapes, don‘t be afraid to do crazy things like move ears far from head, make big nose or so, you can find some interesting shape and then start adding details in your model. First idea when I start sketching was to make some vampirish head but at the end I get to devil head :-)

When you're sculpting, don't try to subdivide it at 4th level right after you put it in zbrush, always try to get maximum details even in basic model, when you'll be quite happy with that, then just move to another level and add more fine details.

I am mostly using just standard brushes like inflate, standard, smooth, pinch and move. I actually didn't use any special alphas for this sculpture. Great feature is to use lazy mouse (L) for wrinkles and smooth lines and transpose to move, scale and rotate your object if it's needed.

Ok now I've finished my sculpture so I need to put it back to max and start the texturing, you can use erotology if its needed, but I was ok with second subdivision level and I knew that I won't use it in some animations so I delete the first one and export the second one to max. Then I've done some unwrap, great tool for unwrap characters and organic things is unfold3d, UVLayout or other similar programs focused just on unwrapping, it's much easier and faster than to do it in max.

When I get my head unwrapped, I've imported it back to zbrush as a first level of the model

Tip: Do not change anything on the model when you're doing unwraping, if you do any change even one edge you won't be able to import it back to zbrush at a first level of your sculpture.Then I generate displace, normal and cavity map



Then I start working with the model in max, just setup some basic lighting and composition to more define the final scene, I also use some basic rig to play with pose but now I am mostly using transpose in Zbrush to pose my characters. Here is some final setup of lights, pose and camera.

Then I start with some texturing in Photoshop. I played a lot with layer blending, just take some concrete photo and blend it nicely to the texture or so, face area is made from many pictures of people and repainted and blended together. Sometimes is good to take one channel from normal map and multiply it into texture, like this you can increase some fine nice detail. I didn't actually play a lot with parts which won't be visible in the final render.

Here is the final diffuse texture:

I've also used some SSS, some specular and reflection masks.

I am using Brazil v2 render system and at that time I had some beta version where included displacement won't working well, but brazil can handle many polygons so I've used Normal displace modifier in max where I put my displace from Zbrush, then just put some turbosmooth on level 3 to get almost same result as some MTD.

I've used just 3 lights and very small amount of GI, one main from left with shadows casting and two others not so intensive to see some contours on the head without shadows.



Ok now I start to play with shaders. For skin shader I used normal Brazil skin shader, you should always try to tweak shader on some simple ball and do not waste your render time on your final model. When you're happy with some result on the ball you can put that on final model and do your final touches on it.

Here is one of many render tests.

Ok now is time to do some flames, I used Fume FX plug-in for max, it's really easy to use and you get amazing results. I`ve select the horns as a source of flames. Here is some setup in fume FX dialog for horns

Then I just click render and let it counting for a while, at the end I go through all the frames and pick the one most interesting for me. I also made few smoke renders to put on his body.

Here is the final render with flames and some smoke.



Then I render few more smoke to put in front of his body to combine them in the final picture. As last thing I render some fur on the body with default settings just tweak the size and length of them to get some nice fine fur details in hi-res render. I should use mask for the places where I didn't want to grow fur but I was in big rush at the end so I just overlay it and erase parts where I don't required.

In final compositing in Photoshop, I made a few color correction, paint some hairs on head, add those smoke renders, add even more blood on some places, tweak contrast and add simple background. And here is the final result as you know it.

I hope you enjoyed this small making of and now you get a better idea of how I did it.


Vaclav Krivanek (Washek)
www: washek.com


Author: Vaclav Krivanek
You may also like...
VWArtClub Top Ten - Week 36

VWArtClub Top Ten - Week 36

The best works from VWArtClub group.


You need to be logged in to leave a comment. Don't have account? Register now.

raimen 17:16:07  |  03-09-2010
gret gret thanks
rashmon 12:23:05  |  16-01-2013
Excellent work plz give me a tips about retopology and baking..my id is krunal17091987@yahoo.co.in