Hi,
i would like to set up a new PC for my 3D hobby in the near future and have
therefore already made up my mind about the hardware:
I work with Maya 2014-2018 and use V Ray and Mental Ray of course synonymous
Adobe CS 6.
I would be glad if you would take a look at my current hardware configuration
and tell me if there is anything to be optimized:

My casing is this: DARK BASE PRO 900 SILVER rev. 2 with another 4 fans

The motherboard is the: Gigabyte X570 Aorus Master

The AMD CPU will be the: AMD Ryzen 9 3950X

As a DDr4 Ram bar I would e.g. :
G.Skill Trident Z Neo DIMM Kit 64GB, DDR4-3600, CL16-16-16-36 (F4-3600C16Q-
64GTZN)
G.Skill RipJaws V Red DIMM Kit 64GB, DDR4-3200, CL14-14-14-34 (F4-3200C14Q-
64GVR)
G.Skill Trident Z silver / red DIMM Kit 64GB, DDR4-3200, CL14-14-14-34 (F4-
3200C14Q-64GTZ)
Kingston HyperX Predator RGB DIMM Kit 64GB, DDR4-3200, CL16-18-18
(HX432C16PB3AK4 / 64)

I would still need a good advice on this topic, because the Ram bars are very
expensive

As SSD i take: 2x Corsair Force Series MP600 1TB, M.2 (CSSD-F1000GBMP600)
one for the C Patition and Windows and one for my 3D folder

The HDD 1 would be: 2x Seagate Enterprise Capacity 10TB (ST10000NM0086)
joined together as Raid 0.

As a graphics card I waver between a:
N Vidia 2060 or even an N Vidia 2080 I would also need an advice therefor

The CPU cooler: Noctua NH-D15 SE-AM4

About the power supply I am still undecided, so if you have any advice, please
dont hazzle to tell me.

The Operating System should probably be Windows 10 Professional.
a loving thanks in advance of me,

Benno