Evermotion Pass 10% Off - Get Instant Access to Thousands of 3D Assets

Check Plans

Information Clause

In accordance with the art. 13 section 1 and 2 of the European Parliament and Council Regulation 2016/679 of the 27th April, 2016 on the protection of natural persons, with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (General Data Protection Regulation), hereafter RODO, I hereby inform that:

1. EVERMOTION S.C., 8 Przędzalniana Str., 15-688 Białystok, Poland is the Administrator of your Personal Data (APD)

2. Data Protection Inspector can be reached through e-mail: iod@evermotion.org

3. Your personal data are to be processed on the basis of art. 6 section 1 letter a, b and f of RODO in order to:
a) prepare, conclude and execute the agreement and for other purposes approved by you,
b) to execute the legitimate interest like marketing of products and the agreement, claim assertion or defence against claims resulting from the law regulations.

4. Entities entitled to the reception of your personal data may be the authorised public bodies; mail providers; providers of the services covered by the agreement; responsible for debt recovery, keeping the archives, document utilization, legal consulting, technical services, IT services and accountancy.

5. Your personal data shall not be transferred to the third country, nor to the international bodies.

6. Your personal data shall be processed within the period of the agreement and upon your additional consent until you withdraw it. APD shall keep the data for the period of any civil law claim execution connected with the agreement.

7. You have the right to demand an access to your personal data, to correct or to delete the data if there is no other basis for the processing or any other purpose of such processing or to limit the processing of the data, to transfer the data to another administrator and to raise objections to the further data processing if there is no legal basis for further processing and to withdraw any previous consent.

8. You provide the personal data voluntarily, however they are necessary to conclude the agreement. The refusal of providing such data may result in the refusal of the agreement conclusion.

9. You have the right to lodge a complaint to the Personal Data Protection Office when in your opinion the data processing violates the regulations of General Data Protection Regulation of the 27 April, 2016 (RODO).

10. Your data will be automatically processed, including the form of profiling.
11. You are obligated to forward above mentioned information to your representative, especially if you appointed this person in the agreement as the contact person or as the representative for the agreement execution.

OK

Wooden cottage

I believe , Sometimes is necessary to portray the calm .. Hi, I am esmail ghadrdani, I have 5 years experience in architectural visualization and industrial design, and I hope you enjoy reading this making-of article. Wooden cottage is personal project . For the purpose of this work I used 3dsMax , Rhinoceros , VRay and Photoshop. 193401 References Starting from images and drawings used on this project as a references . 193377 Modeling The modeling of this project was carried out in the Rhinoceros and taken out with obj format for Max . Before modeling, you must always pay attention to the unit setup . 193378 The modeling is initially started by drawing a curve. This curve is extruded with the "extrude planar curve" command and the initial volume is created . 193379 The front part of the cottage and window are created with "Extrude planar curve" and "Boolean difference" command . 193380 Finally, the retaining pillars were easily added to the body with the extrude command. 193381 With the aid of filet edge, select all sharp edges and create with amount of 1 . 193382 After completion of the modeling , Exported the file with obj format for the 3dsmax . 193383 file imported the 3dsmax . 193384 Some of evermotion models has been used to Space . 193385 Finally, a camera is created and visibility is set . In the picture below you can see the final model. 193386 Lighting Lighting method is as follow : Dome light with an HDRI . 193387 Vray Sun . 193388 Vray lights plane has been used for the interior lighting. In the picture below you see the light position and parameters of the lights . 193389 193390 Materials Floor and Ceiling Material 193391 Columns Material 193392 Carpet Material 193393 Sofa Material 193394 Wall Material 193395 Settings 193396 Post-Production & Render Elements At this stage a color correction and some adjustments like lights and levels in Photoshop has been done . 193397 Raw render 193398 193399 Final image 193401 193402 Thank you , and I hope you like it .. Esmail ghadrdani .

Posted on 20.02.2018

Comment
Views: 151
Comments: 0
esmail71 esmail71
User awards
Other projects by esmail71

LEAVE A COMMENT

You need to be logged in to leave a comment. Don't have account? Register now.